|
Equipment > > Chillers > > Air Cooled Chillers
| Equipment Details |
|
| General Equipment Information |
| Description |
|
Used Carrier 30RAN 045 Air Cooled Scroll Chiller, 208-230V |
| Manufacturer |
|
Carrier |
| Model Number |
|
30RAN045---511KA |
| Serial Number |
|
4807Q04... |
| Year Model |
|
2007 |
| Capacity |
|
45 Tons |
| Equipment Condition |
|
Used / Like New |
|
| Equipment Specifications |
| Powered By |
|
Electric |
| Voltage |
|
230 V |
| Frequency |
|
60 Hz |
| Phase |
|
(3) Three Phase |
| Electrical Classification |
|
Nema 3R Outdoor Duty |
| Compressor Type |
|
Scroll |
| Compressor Brand |
|
Carrier |
| Refrigerant Type |
|
HCFC-22 |
| Condenser Type |
|
Air Cooled Aluminum Fin & Copper Tube |
|
| Logistics |
| Equipment Location (State) |
|
Massachusetts |
|
| Price, Warranty, and Comments |
| Price |
|
Contact for Pricing |
| Additional Comments |
|
# 45 ton Aquasnap Chiller. Barely USED. Ready to work for Industrial Application (Molding, Machinery, Comfort, etc.)
# Made in December of 2007. Installed in 2008. Ran for several months. Then company folded.
# Model is 30RAN045---511KA
# S.N 4807Q04...
# has four Scroll Compressors, Danfoss Units. See photos. Like new. A bit of dirt from sittiing in storage, that's it.
# Included are complete "Hail Guard" shields for the coil fins. New, still in crates. Each of 2 crates for Hail Guards is about 7 ft long x 4 ft wide x 1 foot tall. The Hail Guards are the angled hoods which mount to the both long sides of chiller. They were never installed.
# qty (4) 1.6 HP FANS
# Model Nomenclature:
30RAN = Aquasnap Air Cooled Chiller.
N=Standard XL Start
045 = nominal size in tons
- = pump (no pumps included - we can quote you pump tanks sytems if needed).
- = std marquee display
- = std copper tube/alum fin
5=208/230 volt
# helpful link, complete brochure:
http://chillertrader.com/manufacturer/Carrier/Aquasnap%2030RA010-055%20Air%20Cooled%20Chillers.pdf
# Unit is stored in our lot right now. A custom skid has been made for the underneathy of the unit with pressure treated 4 x 4's. A custom Cordura Nylon tarp has been made (although not 100% needed as this is an outdoor unit) and is currenlty surrounding and protecting the unit as shown in one of the photos.
# We can side load this unit on a flatbed with our lift. Unit is about 9 ft long x 7.5 ft wide. Weight is a bit over 3,000 Lbs.
|
|
| Additional Options |
| Condenser Coil Protection |
|
Yes |
Send Inquiry
|
Equipment Finder
Send E-mail Inquiry